|
NRC-200 / NRC-250 #25/#45 Collet Chuck Type Oil Seal Trimming Machine
|
Product Character
Operation :
This machine is used for cutting the edges of B type oil seals.
- Manual feed, auto trim.
- Cuts the bevel angle of plain face, inner & outer bevel angle simultaneously.
- Auto product blowing off by air cylinder.
- Number of knives can be requested by customer.
Product Specifications
NRC-200 / NRC-250 #25/#45 Collet Chuck Type Oil Seal Trimming Machine
| MODEL | NRC-200 | NRC-250 |
|---|---|---|
| Weight (kgs) | 280 | 350 |
| Dimensions (cm) | 80(L) x 90(W) x 190(H) | 90(L) x 100(W) x 190(H) |
| Collet chuck type | #25 | #45 |
| Cutting range (mm) | O.D. 10 -200 | O.D. 100 -300 |
| Spindle speed (rpm) | 2800, 1700, 1000 | Adjustable |
| Capacity (pcs/min) | 1 5 -2 5 (Appro x .) | |
| Left cutting angle | 30º-70º | |
| Right cutting angle | 0º-90º | |
| Cutting speed | 2 stages, adjustable | |
| Number of cutters | 1~3 | |
| Knife blade size (mm) | 3×3 or 3×1.8 or 5×1.8 | |
| Motor | 2HP, Clutch Motor | 2 HP, 5kg single-flange solenoid clutch brake |
| Inverter | V | V |
| Controller | PLC | |
Other Description :
Valve Seals Sorting Machine (System) / Shaft Seals Optical Sorting Machine (System) / Oil Seals Sorter / O-Ring Optical Sorter / Rubber Seals Vision Inspection System.
