| |
| |
 MAIN PRODUCTS |
| |
Collet Chuck Type Oil Seal Trimming Machine |
|
| OPERATION |
| This machine is used for cutting the edges of B type metal cases,
washers, oil seals and general raw products. |
| 1. |
Manual feed, auto trim. |
| 2. |
Cuts the bevel
angle of plain face, inner & outer bevel angle simultaneously. |
| 3. |
Auto product blowing
off by air cylinder. |
| 4. |
Number of cutters and inverters by customer
request. |
| MODEL |
NRC-200 |
NRC-250 |
Weight (kgs) |
280 |
300 |
Dimensions (cm) |
80(L) × 90(W) × 190(H) |
80(L) × 100(W)× 190(H) |
Cutting range (mm) |
O.D. 8 -200 |
O.D. 100 -300 |
Spindle speed (rpm) |
2800, 1700, 1000 |
Adjustable |
Capacity (pcs/min) |
12-20 (Approx.) |
10-15 (Approx.) |
Collet chuck size (mm) |
φ34 |
φ56 |
Left cutting angle |
30°-70° |
Right cutting angle |
0°-90° |
Cutting speed |
2 stages, adjustable |
Number of cutters |
1~3 |
Cutter size (mm) |
3×3 , 3×1.8 , 5×1.8 |
Motor |
1HP |
2 HP |
Clutch brake |
2kg single-flange solenoid |
4kg single-flange solenoid |
Inverter |
× |
ˇ |
Controller |
PLC + Air cylinder |
|
|
|
HOME
