Home Products Oil Seal Trimming and Spring Loading Machine ATAS-20-V Valve Seal Trimming and Spring Loading Machine

ATAS-20-V Valve Seal Trimming and Spring Loading Machine

  • Valve Seal Trimming and Spring Loading Machine

  • Operation :
    This oil seal machine is especially suitable for trimming the edge and spring loading of large volume valve seals.

    • Auto feeding, trimming, spring loading and collecting most of the trimmed flash.
    • This oil seals machine avoids imprecise cutting because the central point is static while the spindle is rotating.
    • The robot grabs the valve seal to precisely fit it on the central point of the mold on the spindle.
    • Vibrating tray vibrates the valve seal to appropriate location.
    • Magnet rotator feeds the garter spring to appropriate location. Compared to the traditional machine, the spring does not stop on the track of the feeding device.
    • The tooling is pulled fast by the air cylinder to combine the valve seal with the spring.
    • This spring loading machine will check if the garter spring is being correctly loaded by metal probe.
    • This oil seals machine designs with advanced mechanical and electrical drive system to compact machine size.
    • The garter spring is fed and loaded in a vertical position to avoid loading failure.
    • The oil seal machine sorts the inspected parts for good parts and defects. It will reduce the cost of the quality inspection.
  • ATAS-20-V
    Valve Seal Trimming and Spring Loading Machine

    MODEL ATAS-20-V
    Weight (kgs)   460
    Dimensions (cm) 100(L) × 190(W) × 190(H)
    Capacity (pcs/min) 7-12 (Approx.)
    Spindle speed (rpm) 2800
    Cutting angle 30° - 70°
    Number of knives 1
    Tooling pad size (mm) φ 32 or φ 79
    Knife blade size (mm) 3×3 or 3×1.8 or 5×1.8
    Magnet rotator size (mm) 130
    Vibrating tray size (mm) 400
    Motor 1/2 HP
    Clutch brake 1kg single-flange solenoid
    Controller PLC + HMI + mechanical probe