Home Products Rubber Parts Inspection Machine Rubber Parts Sorting Machine ACH-50S Rubber Parts Optical Inspection Machine

ACH-50S Rubber Parts Optical Inspection Machine

  • Rubber Parts Optical Inspection Machine

  • Operation :

    This machine is suitable to measure the dimension of high volume oil seals in the production line.

    • The operator picks an oil seal as a sample and measures the dimension by 2D or 3D measure. Then sets the measured dimension in the HMI as a sample dimension to teach the PLC how to check the inspecting parts.
    • The feeding glass plate carrying the pieces to the inspection unit.
    • To measure I.D. of the different color oil seal and check if the spring is being corrected loaded.
    • The measurement of the ovalization, concentricity and wire diameter are the reference for the operator.
    • To measure flashes and lacks of material by measurement.
    • The machine sorts the inspected parts for good parts and defects.
    • The operator sets the machine with the parameters and the tolerances, as a result he obtains a complete counting report of the good parts and the defects.
    • The statistic can be saved in the USB device for computer analysis purpose.
    • The machine is able to start measuring the parts 30 minutes later after the main power is turned on.
  • MODEL ACH-50S
    Weight (kgs)  350
    Dimensions (cm) 80(L) X 150(W) X 170(H)
    Inspection field size (mm) 90 X 72
    CCD resolution (pixels) 1280 X 1024
    Max. part's O.D. (mm) 50
    Min. part’s I.D. (mm) 10
    part's height (mm) 5-13
    Capacity (pcs/hr)  Approx. 2800 (O.D.=22mm)
    Measurement repeatability (ID, µm) 30
    Measurement repeatability (OD, µm) 40
    Motor  AC Inverter Motor 0.3kw
    Controller PLC + HMI + CCD Camera
    Number of CCD 2

    Other Description :
    Shaft Seals Trimming Machine / Oil Seals Cutting Machine / Rubber Seals Deflashing Machine / Valve Seals Deflashing Machine / Shaft Seals Chamfering Machine / Vacuum Type Rubber Compression Molding Machine.