- Products
- Oil Seal and Rubber Parts Processing Machine
- Oil Seal Trimming and Spring Loading Machine
- Auto Oil Seal Trimming and Spring Loading Machine
Model : ATAS-20 / ATAS-40 / ATAS-60
Description
Operation :
This machine is suitable to cut the flash and load the spring with high volume oil seals in the production line.
- Bowl feeder vibrates the oil seal to appropriate location.
- The vacuum generator sucks the oil seal to precisely fit it on the central point of the mold on the spindle.
- Able to cut the inner lip and flash simultaneously.
- Servo knife is optional equipment.
- Magnet rotator/Bowl feeder feeds the spring to appropriate location.
- The tooling is pulled fast by the air cylinder to combine the oil seal with the spring.
- It will check if the spring is being correctly loaded by metal probe.
- The machine sorts the parts for good parts and defects.
- At the end there must be a counter to count the good seals, after the machine counts the set number the machine will stop with an alarm.
- For each stroke of knife there should be a counter to monitor the life of Knife, after the machine counts the set number, the machine should stop automatically for changing the knife with an alarm.
- This machine reaches the highest cutting precision because the central point of the spindle is static.
Specifications
MODEL | ATAS-20 | ATAS-40 | ATAS-60 |
---|---|---|---|
Weight (kgs) | 560 | 560 | 580 |
Dimensions (cm) | 95(L) x 190(W) x 190(H) | 95(L) x 190(W) x 190(H) | 95(L) x 205(W) x 190(H) |
Oil Seal Range (mm) | 8-20 | 21-40 | 41-50 |
Capacity (pcs/min) | 7-12 (Approx.) | ||
Spindle Speed (rpm, 60Hz) | 2800 | ||
Cutting Angle | 30° - 70° | ||
Servo knife | Option | ||
Number of Cutters | 2 | ||
Tooling Pad Size (mm) | φ 32 or φ 79 | ||
Cutter Size (mm) | 3×3 or 3×1.8 or 5×1.8 | ||
Spring Range (mm) | Max. 32 | ||
Size of Spring Feeder(mm) | 135 (Magnet rotator) | 135 (Magnet rotator) | 300 (Bowl feeder) |
Size of Seal Feeder (mm) | 400 (Bowl feeder) | 400 (Bowl feeder) | 500 (Bowl feeder) |
Spindle Motor | 1/4 HP | ||
Controller | PLC + HMI + mechanical probe |
Video